1.采用电子松线器,直接通过伺服系统控制，比传统的夹线器，反应更灵敏，精度更高。替代松线钢丝，过厚线迹更稳定（杜绝松线不复位，钢丝易断）。
2.薄厚通吃，缝厚能力强:减少每次变化面料薄厚度时缝纫机的负担，进一步扩大缝纫范围，适用于牛仔，纱等各种面料的缝制。
3.带有USB，轻松使用，快捷方便。
5.密封油盘，避免油污造成的缝料污染,同时可减小整机运作时的噪音。
4.采用剪线凸轮驱动的双圆刀剪线机构，可在机针正下方完成剪线，缝纫后的线头最短可达3MM,可有效减少人工剪线的工作量。
5.密封油盘，避免油污造成的缝料污染，同时可减小整机运作时的噪音。
1. It is directly controlled by servo system, which is more sensitive and more accurate than the traditional wire clamping device.Instead of Tension release wire asm., stitch more stable through heavy fabic（Avoid to Tension release wire restoration or broken down)
2. Good peformance on thick material. Reduce the machine's burden when material thicknesschange. Then, expand the materials range, suitable for thin or thick all kinds material , like jeans and yarn and so on.
3.With USB, easy to use,quick and convenient.
4. Adopt double round knives trimming system by cam device.trim thread can below needle, theremaining thread can be as short as 3MM.Effectively,reduce the manual trimming workload.
5.Sealed oil tank, avoid cloth dirty from oil.Reduce noise when machine working.
Double cutting knife Closed oil tank Electrical thread tension release USB